Hot Composits Gliders HLG Order Form Technical Data Motor Recommandations

"HYBIRD" F3J Competition,

€599.00

see also "HYBIRD-DETECT" and "HYBIRD-C"

Wingspan: 315 cm
Length: 148 cm
Wing profile: MH-32
Stab profile: NACA 63 A009
Kit Weight: 1100 g
R/C Functions:
Rudder
Elevator
Flaps and Ailerons
Crow Braking
HYBIRD. F3J Competition

The Hybird is the super floater you have always dreamed of and it offers a new dimension in large lightweight Soarers. At 3,15 metre span the model has a kit weight of "only" 1100g. The slim Carbon / Kevlar fuselage has removable nose cone and inner nose boot. The "D" Box Hybrid has raised the standards to a new level, and reaches levels previously unequalled in strength versus weight. The three-piece wings and removable Vee tail ensure the model is easy to transport. The wing panels are constructed in an open rib "D" Box structure, each of the selected balsa ribs is fitted with a carbon cap strip, the Carbon / Kevlar "D"-Box and Carbon Spars combine to produce an extremely strong and rigid wing. The flaps and ailerons are knuckle jointed with three-point hinging for aerodynamic efficiency and low overall weight. The wings are covered in Oracover and are designed for competition style launches by winch or two-man tow. The two-piece removable Vee tailplane is of similar construction to the wing. This model is the culmination of many years of experience in this type of construction. The MH32 wing section gives the model an extremely wide speed range and excellent thermal flight characteristics. The handling is outstanding and the model will hold a turn as if it were on rails but will change direction at will due to the lightweight tip panels.

Fuselage of HYBIRD


You may order the version of a fuselage with a Cross-tale. This version only on 10г. is heavier than the standard version.
Version of fuselage with a cross-tail.
€614.00



Click on pictures for inlarge
 

 LES PHOTOS DU DEBALLAGE !!

Hot Composits Gliders HLG Order Form Technical Data Motor Recommandations